Quiz | GCodeTutor

Autoplay
Autocomplete

Previous Lesson Complete and Continue

CNC Milling machine programming using G-Code

Introduction

Introduction (1:40)
The basics (5:37)

Laying out the program and component

Laying out the header information (3:49)
Setting the datum (3:19)
Setting the planes using G17, G18 and G19 (6:01)

Canned Cycles

G81 Drilling cycle (8:10)
G82 Counter boring (2:36)
G83 peck drilling (4:49)
G84 Tapping cycle (5:32)
G85 and G86 boring cycles (3:20)

3 Axis Milling

Helical Milling (8:22)

Writing a program to make the bracket

The Bracket - Planning (1:54)
Face Milling (8:16)
Centre Drill (4:40)
Drilling (4:02)
Tapping (2:01)
Cutting the Slot (7:39)
The Profile (4:51)
The second side - Your Turn (0:30)

Programming a complete part with 6 tools

Studying the engineering drawing (3:09)
Roughing out the bore using helical spiral milling (8:49)
Finishing the bore with G86 boring cycle (2:28)
Milling the profile (5:24)
Centre drilling the holes using the G82 canned cycle (6:04)
Peck drilling the holes with G83 (4:04)
Tapping using the G84 cycle (3:21)

Take the Test

Quiz

Teach online with

Quiz

Lesson content locked

If you're already enrolled, you'll need to login.

Enroll in Course to Unlock