Introduction
Laying out the program and component
Canned Cycles
3 Axis Milling
Writing a program to make the bracket
Programming a complete part with 6 tools
-
Studying the engineering drawing (3:09)
-
Roughing out the bore using helical spiral milling (8:49)
-
Finishing the bore with G86 boring cycle (2:28)
-
Milling the profile (5:24)
-
Centre drilling the holes using the G82 canned cycle (6:04)
-
Peck drilling the holes with G83 (4:04)
-
Tapping using the G84 cycle (3:21)
Take the Test
